Argent Chrome & Brass

Full Depth Radiant Gas Fire

Argent Chrome & Brass

Full Depth Radiant Gas Fire

ERP Product Data Sheet

  • 3 Year Guarantee
  • 3.5kW Direct Output
  • Open Fronted Gas Fire

The Argent is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The Argent is available with a coal effect fuel bed. It can be specified in Manual Control (Rotary).

Installed with a modern fireplace the Argent can really help transform the look and feel of your living room. The Argent comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The Argent frame comes with a chrome outlay and brass inlay design. The frame is held in position with magnets (supplied). Designed with affordability in mind the Argent is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

Model Identifier Conventional Full Depth Inset Radiant Heater Gas Category/Pressure = I2H(20)
Heat Input Gross (High) 6.8kW
Heat Input Gross (Low) 3.5kW
Heat Output Gross (High) 3.8kW
Heat Output Gross (Low) 1.9kW
Energy Efficiency Class F
Direct Heat Output 3.5kW
Heat Type Radiant Heat
Chimney Flue Compatibility Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control)
Control Location Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control)
Air Vent Required Not Required
Manufacturer Guarantee 3 Years
Safety Features Flame & Oxygen Monitoring Device
Installation Requirement Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces
Fuel Type Natural Gas
Fire Type Open Fronted
Installation Type Inset
Engine Type Full Depth Radiant
Product Width A 480mm
Product Height B 595mm
Product Depth C 180mm
Firebox Width D1 245mm
Firebox Width D2 375mm
Firebox Height E 545mm
Fireplace Opening Width Min 375mm
Fireplace Opening Width Max 450mm
Fireplace Opening Height Min 540mm
Fireplace Opening Height Max 575mm
Fireplace Opening Depth 200mm

spares-banner-1