The Laiton Multiflue inset gas fire is one of our most popular models thanks to it’s slimline design and affordable price point. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.
This fire can be specified with a coal effect fuel bed and is available in Manual (Rotary) Control.
Installed with a modern fireplace the Laiton can really help transform the look and feel of your living room. The Laiton comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Laiton is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
This product is not suitable for primary heating
|Model Identifier||Conventional Slimline Inset Radiant Heater Gas Category/Pressure = I2H(20)|
|Heat Input Gross (High)||6.2kW|
|Heat Input Gross (Low)||3.5kW|
|Heat Output Gross (High)||3.1kW|
|Heat Output Gross (Low)||1.8kW|
|Energy Efficiency Class||F|
|Direct Heat Output||3.2kW|
|Heat Type||Radiant Heat|
|Chimney Flue Compatibility||Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)|
|Control Ignition||Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control)|
|Control Location||Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control)|
|Air Vent Required||Not Required|
|Manufacturer Guarantee||3 Years|
|Safety Features||Flame & Oxygen Monitoring Device|
|Installation Requirement||Gas Safe Registered Installer (Bord Gais - ROI)|
|Installation Information||As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces|
|Fuel Type||Natural Gas|
|Fire Type||Open Fronted|
|Product Width A||480mm|
|Product Height B||595mm|
|Product Depth C||110mm|
|Firebox Width D1||215mm|
|Firebox Width D2||350mm|
|Firebox Height E||545mm|
|Fireplace Opening Width Min||350mm|
|Fireplace Opening Width Max||440mm|
|Fireplace Opening Height Min||540mm|
|Fireplace Opening Height Max||575mm|
|Fireplace Opening Depth||130mm|
- Multiflue Gas Fire – ERP Compliant Table 1 | 132.77 KB