Charlottesville Oak

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Charlottesville Pine

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Charlottesville White

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Durham Pine

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Hurst Oak & Grey LED Stove Suite

The Hurst stove suite will add a fantastic new feature to your room. The suite, which needs assembly can be installed against a flat wall,
you then simply plug it in to give you that warm glow from the LED lights or heat from the variable fan heater in the stove. The LED stove is a 1.5kW heater with a realistic log effect fuel bed. The realistic flame effect can be used independently of the heater.

Medford LED Wall Inset

The Medford is a wall inset electric fire and features: 2.0kW variable heat output, flame effect only – no heat, five flame picture settings, thermostatic control, timer, LED flame picture technology, full remote control or the buttons are discretely hidden under the grill. It has
a helpful LED display located in the top right hand corner of the window which displays the heat setting, flame cycle and sleep timer.
Please note: the LED display is only shown when changing a function. An additional benefit is that you can also position a TV above the fire as the fan heater is located at the front of the fire.

Mini Mercia Oak

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Montana White

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Nebraska Oak

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Nebraska Walnut

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.