Blenheim Black

The multiflue inset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Black

The Blenheim full depth radiant inset gas fires is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The full depth gas fire is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Blenheim full depth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Black

The Blenheim glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.

The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.

The Blenheim glass fronted can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Black

This full depth inset tapered burner tray is designed to fit a standard chair brick (also commonly referred to as a fire back). Chair bricks are popular in older homes with a class 1 brick chimney, orginally used for burning solid fuel. The tray requires a min. 178mm / 7″ pre-fabricated flue system or conventional brick chimney. It is classed as a Decorative Gas Fire (DGF). The tray produces a lovely full depth flame picture however, as this is an open fronted fire placed within a chair brick (without a modern firebox).

The tray can be specified in Manual Control (Rotary) or Remote Control.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire. The ashpan is a separate component and provides access to the controls.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

Blenheim Black

The inset flueless gas fire is based upon a traditional inset gas fire but due to its innovative catalytic flueless technology doesn’t require a chimney or flue. It features all the benefits of flueless catalytic technology; reduced running costs, simple installation, realistic coal fuel bed and an ultra clean burning ribbon burner. Being flueless all the of the 2.3kW heat output is distributed into the room with no loss up the chimney unlike a conventional gas fire.

A 43mm spacer frame is fitted as standard to minimise fitting depth (92mm + 20mm clearance) however, for a true flat wall fix to a non-combustible wall/backpanel then the 43mm spacer can be removed and an optional 155mm spacer frame purchased.

The only considerations when installing this appliance are a minimum room size of 27m³, an accessible 8mm gas supply and 100cm² purpose provided ventilation.

This fire is available in Manual (Rotary) with coal fuel bed only. There is no requirement for mains power supply or battery for ignition.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The one-piece frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

Blenheim Black

The Blenheim LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Blenheim LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Blenheim LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.

Blenheim Black

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Blenheim LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Blenheim LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Blenheim LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.

Cardivik Black

The flame effect can be used independently without heat, by using either the remote control or buttons on the front of the fire located behind the door. The Cardivik features: Burning log sound effect, 5 different flame effects to choose from, heat is dispersed from the bottom of fire, the thermostat helps to control the temperature of your room.

Charmouth

The Charmouth features: 1.8kW variable heat output, flame effect only – no heat, 5 flame picture settings, thermostatic control which automatically turns the heater on and off to your desired temperature, timer, LED flame picture technology, full remote control or buttons on the underside of the fire and has a helpful LED display located in the top right hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. This versatile modern wall mounted electric fire simply hangs on the wall and a popular feature is that a TV can be positioned directly above the fire. This is due to the fact that the Charmouth has a fan heater at the bottom of the fire which directs the heat downwards.

This product is only suitable for well insulated spaces or occasional use.

Cheshire

The Cheshire is a stylish wall mounted flueless catalytic gas fire. Despite its compact size provides an impressive heat output of 2.0kW, suitable for small to medium sized living spaces with a minimum volume of 23m³. The simple clean lines and black glass fascia would equally complement a modern or traditional interior. Designed to simply hang on the wall, the Cheshire is a great option if you are after a high efficiency focal point that is simple to use and provides instant heat to your room.

Flueless gas fires offer the following benefits: 100% efficiency, reduced running costs, simplified installation and servicing. Incorporate the latest in gas fire technology flueless gas fires do not need a chimney or flue to operate. Instead the combustion gases pass through a catalytic system positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour. Levels of which are so low they are typically present in fresh air. Our innovative technology provides a flexible design allowing you to install a fire not only in the living room but dining room, office, or kitchen. Not suitable for bedrooms or bathrooms.

The only points to consider when installing a flueless gas appliance are a minimum room size (see individual product specification), an accessible 8mm gas supply and the allowance of a 100cm² air vent to be installed in the room. TVs are not permitted to be installed above a flueless gas fire as a majority of the heat generated by the fire comes out of the top.

This Cheshire is available in Manual control (Rotary) positioned on the right hand side of the fire for easy accessibility. There is no requirement for mains power supply or battery for ignition.