Amersham

The Amersham complete electric fireplace suite is a fully assembled electric fire suite. It features an all white surround, back panel and hearth.

The fireplace suite has a 1.5kW heater with a realistic log effect fuel bed. The realistic flame effect can be used independently of the heater and the fire also features an LED display, remote control, timer and thermostatic control options.

This product is only suitable for well insulated spaces or occasional use.

Charlottesville White

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Dalvik White

The Dalvik flueless gas stove looks and feels like a real wood burner but doesn’t haven’t any of the drawbacks of a solid fuel stove.  Flueless gas stoves are the latest must-have in home decoration. Powerful, efficient and amazingly versatile heat. At last, a gas stove that is equally at home in urban city living as it is in rural country abodes. The Dalvik doesn’t require storage space for logs or cleaning out the ashes after use as there are none. The simplicity and controllability of gas at your fingertips provides a system that is far superior to operate and cleaner to maintain. The Dalvik provides an extremely powerful heat output of 3.1kW, and is fully variable from low – 1.5kW. In addition to these benefits a flueless stove will be significantly cheaper to install and run.

Flueless gas stoves offer a number of installation possibilities. They can be installed without a hearth; against a flat wall, with a fireplace, or placed within a inglenook (consult instructions). They require a minimum room size of 35m³ (typically 3.82m x 3.82m with a 2.4m high ceiling) and 100cm² of purpose provided ventilation.

The Dalvik design features a large uninterrupted glass window that allows the fire to be enjoyed in all its beauty. It is cast from aluminum to reduce weight and available in black or white powder coat finish. And, finally to complement the overall aesthetic, a matching door handle and slide control handle is supplied finished in brushed stainless steel.

Flueless gas stoves offer the following benefits: reduced running costs, simplified installation and servicing. Incorporating the latest in gas fire technology flueless gas stoves do not need a chimney or flue to operate. Instead the combustion gases pass through a catalytic system positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour. Levels of which are so low they are typically present in fresh air. Our innovative technology provides a flexible design allowing you to install a fire not only in the living room but also dining room, office, or kitchen. Not suitable for bedrooms or bathrooms.

The only points to consider when installing a flueless gas appliance are a minimum room size (see individual product specification), an accessible 8mm gas supply and the allowance of a 100cm² air vent to be installed in the room. TVs are not permitted to be installed above a flueless gas fire as a majority of the heat generated by the fire comes out of the top.

The Dalvik is available in Manual control (Fingerslide) positioned on the front face for easy accessibility. There is no requirement for mains power supply but a battery is required for ignition (supplied). To light the stove simply slide the lever to the left and then once the pilot is lit, slowly move the lever to the right to vary from low through to high setting. To turn the fire off simply slide the level all the way to the right.

Dalvik White

The Dalvik electric stove looks and feels like a real wood burner but doesn’t have any of the drawbacks of a solid fuel stove. No chimney or flue is required, no storage is required for the logs and an electric stove does not require cleaning after use. The simplicity of electric at your finger tips and controlability of heat provides a system that is far superior to operate and cleaner to maintain. In addition to these benefits an electric stove will be significantly cheaper to install as you will simply only need to plug in to feel the heat.

The electric stove can be operated either by the control panel or by remote control. The control panel is located on the top of the stove underneath a discreet panel on top of the stove. The Dalvik benefits from having a 1.8kW variable fan heater which allows you to choose from 10 different power settings 18°C – 27°C, or you can use the flame effect only – no heat, 4 flame picture settings, timer, LED flame picture technology.

The Dalvik features a beautiful solid cast body and is available in matt black, burgundy or white finish. At the heart of the stove is a large window that allows the LED engine to be enjoyed in all its beauty. This stunning stove can be personalised with either “classic arch” or “open” door design.

Leirvik White

The Leirvik flueless gas stove looks and feels like a real wood burner but doesn’t haven’t any of the drawbacks of a solid fuel stove. Flueless gas stoves are the latest must-have in home decoration. Powerful, efficient and amazingly versatile heat. At last, a gas stove that is equally at home in urban city living as it is in rural country abodes. The Leirvik doesn’t require storage space for logs or cleaning out the ashes after use as there are none. The simplicity and controllability of gas at your fingertips provides a system that is far superior to operate and cleaner to maintain. The Leirvik provides an extremely powerful heat output of 3.1kW, and is fully variable from low – 1.5kW. In addition to these benefits a flueless stove will be significantly cheaper to install and run.

Flueless gas stoves offer a number of installation possibilities. They can be installed without a hearth; against a flat wall, with a fireplace, or placed within a inglenook (consult instructions). They require a minimum room size of 35m³ (typically 3.82m x 3.82m with a 2.4m high ceiling) and 100cm² of purpose provided ventilation.

The Leirvik design features a large uninterrupted glass window that allows the fire to be enjoyed in all its beauty. It is cast from aluminum to reduce weight and available in black or white powder coat finish. And, finally to complement the overall aesthetic, a matching door handle and slide control handle is supplied finished in brushed stainless steel.

Flueless gas stoves offer the following benefits: reduced running costs, simplified installation and servicing. Incorporating the latest in gas fire technology flueless gas stoves do not need a chimney or flue to operate. Instead the combustion gases pass through a catalytic system positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour. Levels of which are so low they are typically present in fresh air. Our innovative technology provides a flexible design allowing you to install a fire not only in the living room but also dining room, office, or kitchen. Not suitable for bedrooms or bathrooms.

The only points to consider when installing a flueless gas appliance are a minimum room size (see individual product specification), an accessible 8mm gas supply and the allowance of a 100cm² air vent to be installed in the room. TVs are not permitted to be installed above a flueless gas fire as a majority of the heat generated by the fire comes out of the top.

The Leirvik is available in Manual control (Fingerslide) positioned on the front face for easy accessibility. There is no requirement for mains power supply but a battery is required for ignition (supplied). To light the stove simply slide the lever to the left and then once the pilot is lit, slowly move the lever to the right to vary from low through to high setting. To turn the fire off simply slide the level all the way to the right.

Leirvik White

The Leirvik electric stove looks and feels like a real wood burner but doesn’t have any of the drawbacks of a solid fuel stove. No chimney or flue is required, no storage is required for the logs and an electric stove does not require cleaning after use. The simplicity of electric at your finger tips and controlability of heat provides a system that is far superior to operate and cleaner to maintain. In addition to these benefits an electric stove will be significantly cheaper to install as you will simply only need to plug in to feel the heat.

The electric stove can be operated either by the control panel or by remote control. The control panel is located on the top of the stove underneath a discreet panel on top of the stove. The Leirvik benefits from having a 1.5kW variable fan heater which allows you to choose from 10 different power settings 18°C – 27°C, or you can use the flame effect only – no heat, 4 flame picture settings, timer, LED flame picture technology.

The Leirvik features a beautiful solid cast body and is available in matt black or white finish. At the heart of the stove is a large window that allows the LED engine to be enjoyed in all its beauty. This stunning stove can be personalised with either “classic arch” or “open” door design.

Malmesbury Oak

The Malmesbury complete electric fireplace suite is a fully assembled electric fire suite. It features an oak veneer surround which contrast beautifully with the white back panel and hearth.

The fireplace suite has a 1.5kW heater with a realistic log effect fuel bed. The realistic flame effect can be used independently of the heater and the fire also features an LED display, remote control, timer and thermostatic control options.

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.

This product is only suitable for well insulated spaces or occasional use.

Montana White

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Nebraska White

At Focal Point Fires we have a wide range of modern and traditional wooden fireplace surrounds. Our surrounds are available in a number of different finishes including: pine, MDF with oak or walnut veneer, and painted white. Our wooden surrounds are designed to be attractive yet affordable and therefore we employ a number of techniques to give the appearance of real wood but at a fraction of the cost.

Our high quality oak and walnut veneer surrounds along with our painted models are made using a stable MDF core base. Our pine and waxed pine models are made from solid pine and provide you with the opportunity to hand paint or stain to a colour of your choice to match your interior. Please note our wooden veneer surrounds feature natural variations in knot formation making each fireplace unique.

Your fireplace is made up of a number of different components and it is important to ensure that your installer not only meets the required qualifications and requirements, but that they have all the necessary experience to fit ALL the components. Focal Point Fires recommends the fitting of all gas fireplaces to be undertaken by a competent fitter registered with Gas Safe (Bord Gais in ROI).

This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements. All installations must be carried out in accordance with the requirements set out in the Building Regulation documents, in particular, Approved Document J. There are independent bodies which have been approved to carry out installations in accordance with these regulations.

Please note: A laminate backpanel and hearth is not suitable to be used with our high efficiency gas fires.

Panoramic

The Panoramic complete electric fireplace suite is a fully assembled electric fire suite. This contemporary electric fire suite combines a white surround, glass side panels and subtle graphite hidden base to create a modern suite. The benefit of the glass side panels allows you to see the real pebble fuel bed with ease. The fireplace suite has a 2.0kW and features a realistic flame effect which can be used independently of the heater and the fire also features 4 different flame heights and a remote control.

This product is only suitable for well insulated spaces or occasional use.