Arch Satin Black

The Arch full depth radiant inset gas fires is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The full depth gas fire is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Arch full depth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The beautiful and distinct Arch Timeless solid cast frame emulates the grand cast iron inserts used in larger period fireplaces. However, it is brought to you on a smaller scale so that this classic piece of interior design can be enjoyed by a modern generation of home owners. The Arch frame is cast using traditional sand casting techniques and therefore may naturally include some minor imperfections such as pitting and black residual polishing marks, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The decorative ashpan is a removable component that allows access to the controls (model dependent). It is held in position by discrete fixings located in the frame. The Arch is available in polished cast iron or black finish

This product is not suitable for primary heating

Arch Satin Chrome

The Arch full depth radiant inset gas fires is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The full depth gas fire is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Arch full depth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The beautiful and distinct Arch Timeless solid cast frame emulates the grand cast iron inserts used in larger period fireplaces. However, it is brought to you on a smaller scale so that this classic piece of interior design can be enjoyed by a modern generation of home owners. The Arch frame is cast using traditional sand casting techniques and therefore may naturally include some minor imperfections such as pitting and black residual polishing marks, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The decorative ashpan is a removable component that allows access to the controls (model dependent). It is held in position by discrete fixings located in the frame. The Arch is available in polished cast iron or black finish.

This product is not suitable for primary heating

Blenheim Black

The multiflue inset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Black

The Blenheim full depth radiant inset gas fires is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The full depth gas fire is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Blenheim full depth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Black

The Blenheim glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.

The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.

The Blenheim glass fronted can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Brass

The multiflue inset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Brass

The Blenheim full depth radiant inset gas fires is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The full depth gas fire is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Blenheim full depth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Brass

The Blenheim glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.

The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.

The Blenheim glass fronted can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Chrome

The Blenheim glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.

The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.

The Blenheim glass fronted can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating

Blenheim Chrome

The multiflue inset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret and ashpan is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

This product is not suitable for primary heating