Dalvik Burgundy Flueless gas Stove

Solid cast iron construction increases durability

Clean and easy to operate, no need to fill with logs or coals

Can be used as a secondary source of heat, requires ventilation of 100 cm² and installed by a gas safe fitter

This stove is flueless, meaning it doesn’t require a chimney for installation

ES2000 Black

The ES2000 Black electric stove has a traditional design and features technology designed to significantly improve the flame picture and running performance. The electric stove is freestanding which allows you to stand it in almost any location or position. The mains power lead is approx. 1.6m long.

The controls are discretely positioned behind the drop-down ashpan. To keep operation simple there are two rotary dials which control the thermostat and flame intensity, and four switch settings: 1) Fan Heater 2) 900W, 3) 900W and 4) Flame Effect. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The ES2000 can be selected to operate without heat for a cool summer breeze. Additionally, a great feature of this product is that you can set it to a flame effect only setting so you can enjoy the look and feel of a flickering flame (without heat) for an all year round focalpoint.

ES2000 Burgundy

The ES2000 Red electric stove has a traditional design and features technology designed to significantly improve the flame picture and running performance. The electric stove is freestanding which allows you to stand it in almost any location or position. The mains power lead is approx. 1.6m long.

The controls are discretely positioned behind the drop-down ashpan. To keep operation simple there are two rotary dials which control the thermostat and flame intensity, and four switch settings: 1) Fan Heater 2) 900W, 3) 900W and 4) Flame Effect. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The ES2000 can be selected to operate without heat for a cool summer breeze. Additionally, a great feature of this product is that you can set it to a flame effect only setting so you can enjoy the look and feel of a flickering flame (without heat) for an all year round focalpoint.

ES2000 Cream

The ES2000 Cream electric stove has a traditional design and features technology designed to significantly improve the flame picture and running performance. The electric stove is freestanding which allows you to stand it in almost any location or position. The mains power lead is approx. 1.6m long.

The controls are discretely positioned behind the drop-down ashpan. To keep operation simple there are two rotary dials which control the thermostat and flame intensity, and four switch settings: 1) Fan Heater 2) 900W, 3) 900W and 4) Flame Effect. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The ES2000 can be selected to operate without heat for a cool summer breeze. Additionally, a great feature of this product is that you can set it to a flame effect only setting so you can enjoy the look and feel of a flickering flame (without heat) for an all year round focalpoint.

ES2000 Grey

The ES2000 Grey electric stove has a traditional design and features technology designed to significantly improve the flame picture and running performance. The electric stove is freestanding which allows you to stand it in almost any location or position. The mains power lead is approx. 1.6m long.

The controls are discretely positioned behind the drop-down ashpan. To keep operation simple there are two rotary dials which control the thermostat and flame intensity, and four switch settings: 1) Fan Heater 2) 900W, 3) 900W and 4) Flame Effect. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The ES2000 can be selected to operate without heat for a cool summer breeze. Additionally, a great feature of this product is that you can set it to a flame effect only setting so you can enjoy the look and feel of a flickering flame (without heat) for an all year round focalpoint.

Lycia Black & Brass

The Lycia LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Lycia LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Lycia LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The one-piece frame is held in position with magnets (supplied).

This product is only suitable for well insulated spaces or occasional use.

Lycia Black & Chrome

The Lycia LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Lycia LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Lycia LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The one-piece frame is held in position with magnets (supplied).

This product is only suitable for well insulated spaces or occasional use.

Soho Satin Black

The Soho LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. The Soho LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Soho to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Soho Timeless is a premium solid cast iron frame with subtle decorative detailing. It is the more minimalist of the Timeless cast frames and therefore would equally suit an interior with modern or traditional feel. It is available in a beautiful hand polished cast iron finish or traditional painted black. The Soho frame is manufactured by traditional iron foundry techniques and therefore may naturally include some minor imperfections such as pitting and black residual polishing marks. This is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The Soho’s removable ashpan is a separate component that is suspended off the hearth by discrete fixings in the cast frame. The ashpan allows access, if applicable, to the controls (model dependent).

This product is only suitable for well insulated spaces or occasional use.

Svelvik Black Flueless Gas Stove

Solid steel construction makes this product more durable

Clean and easy to operate, no need to fill with logs or coals

Can be used as a secondary source of heat, requires ventilation of 100 cm² and installed by a gas safe fitter

This stove is flueless, meaning it doesn’t require a chimney for installation

Svelvik Burgundy Flueless Gas Stove

Solid steel construction makes this product more durable

Clean and easy to operate, no need to fill with logs or coals

Can be used as a secondary source of heat, requires ventilation of 100 cm² and installed by a gas safe fitter

This stove is flueless, meaning it doesn’t require a chimney for installation