Blenheim Black

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Blenheim LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Blenheim LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Blenheim LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.

Blenheim Brass

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Blenheim LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Blenheim LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Blenheim LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.

Blenheim Chrome

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Blenheim LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Blenheim LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Blenheim LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The Blenheim fret is available in: brass (solid brass), brass & black (solid brass), chrome (chrome plated brass), chrome & black (lightweight aluminium), black (lightweight aluminium). The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.

Elegance Antique Brass

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Elegance Antique LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Elegance LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Elegance Antique LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is a solid brass & black freestanding front, which is independent from the fire. The one-piece frame is held in position with magnets (supplied) and is black with brass effect outlay.

This product is only suitable for well insulated spaces or occasional use.

Elegance Black

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Elegance LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Elegance LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is a solid brass & black freestanding front, which is independent from the fire. The one-piece frame is held in position with magnets (supplied) and is black with brass effect outlay.

This product is only suitable for well insulated spaces or occasional use.

Elegance Brass

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Elegance LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Elegance LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Elegance LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is a solid brass & black freestanding front, which is independent from the fire. The one-piece frame is held in position with magnets (supplied) and is black with brass effect outlay.

This product is only suitable for well insulated spaces or occasional use.

Elegance Chrome

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Elegance LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Elegance LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Elegance LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is a solid brass & black freestanding front, which is independent from the fire. The one-piece frame is held in position with magnets (supplied) and is black with brass effect outlay.

This product is only suitable for well insulated spaces or occasional use.

Finsbury Satin Black

The Finsbury takes our standard electric fire to another dimension. Our premium range of LED Reflections electric fires include a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Finsbury fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Finsbury to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Finsbury Timeless premium solid cast frame is a stunning classic design with ornate detailing. The distinct fret includes two prominent piers decorated by ornate finials. The decorative ashpan with distinct pattern work is located in position by discrete fixings in the frame and when removed allows access, if applicable, to the controls (model dependent). The Finsbury has been manufactured using traditional sand casting techniques. Therefore naturally some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The Finsbury is available in polished cast iron or black finish.

Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.

Finsbury Satin Chrome

The Finsbury takes our standard electric fire to another dimension. Our premium range of LED Reflections electric fires include a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function.

For added convenience two spacer frames are provided (supplied fitted) to allow the Finsbury to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Finsbury Timeless premium solid cast frame is a stunning classic design with ornate detailing. The distinct fret includes two prominent piers decorated by ornate finials. The decorative ashpan with distinct pattern work is located in position by discrete fixings in the frame and when removed allows access, if applicable, to the controls (model dependent). The Finsbury has been manufactured using traditional sand casting techniques. Therefore naturally some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The Finsbury is available in polished cast iron or black finish.

Please note the price is dependent upon the final configuration.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine whether this appliance is compatible with your requirements.

Horizon Black

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Horizon LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Horizon LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Horizon LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The elegant understated Horizon front has slightly angled horizontal bars and subtle curved profile allows it to equally suit contemporary, modern or traditional home decors. The Horizon fret is available in: brass (solid brass), chrome (chrome plated brass), black (lightweight aluminium). It is designed to free stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.