The Ebony is a contemporary wall mounted flueless catalytic gas fire that simply hangs on the wall with just four screws (not to be installed in a recess). It features a slimline profile with sleek curved black glass fascia. Despite its small size the Ebony delivers a good heat output and requires a minimum room size of 23m³ (approx 3.1m x 3.1m with an average 2.4m ceiling height) is required along with a 100cm² air vent in the room of installation. Compact and refined the Ebony seamlessly integrates into your living space providing a modern focal point to any room where space is a premium.
Flueless gas fires offer the following benefits: Reduced running costs, simplified installation and servicing. Incorporating the latest in gas fire technology flueless gas fires do not need a chimney or flue to operate. Instead the combustion gases pass through a catalytic system positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour. Levels of which are so low they are typically present in fresh air. Our innovative technology provides a flexible design allowing you to install a fire not only in the living room but dining room, office, or kitchen. Not suitable for bedrooms or bathrooms.
The only points to consider when installing a flueless gas appliance are a minimum room size (see individual product specification), an accessible 8mm gas supply and the allowance of a 100cm² air vent to be installed in the room. TVs are not permitted to be installed above a flueless gas fire as a majority of the heat generated by the fire comes out of the top.
This Ebony is available in Manual control (Rotary) positioned on the right hand side of the fire for easy accessibility. There is no requirement for mains power supply or battery for ignition.
|Heat Input (High)
|Heat Input (Low)
|Heat Output (High)
|Heat Output (Low)
|Radiant & Convected
|Chimney Flue Compatibility
|No Chimney or Flue Required
|Battery-Free Piezo Spark Ignition (Manual - Rotary Control)
|Air Vent Required
|Flame & Oxygen Monitoring Device
|Gas Safe Registered Installer (Bord Gais - ROI)
|As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
|Product Width A
|Product Height B
|Product Depth C
|Firebox Width D
|Firebox Height E