- Tapered inset gas tray
- Full depth fuel bed
- Ideal for Victorian Fireplaces converting from solid fuel
This full depth inset tapered burner tray is designed to fit a standard chair brick (also commonly referred to as a fire back). Chair bricks are popular in older homes with a class 1 brick chimney, orginally used for burning solid fuel. The tray requires a min. 178mm / 7″ pre-fabricated flue system or conventional brick chimney. It is classed as a Decorative Gas Fire (DGF). The tray produces a lovely full depth flame picture however, as this is an open fronted fire placed within a chair brick (without a modern firebox).
The tray can be specified in Manual Control (Rotary) or Remote Control.
The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is a solid brass & black freestanding front, which is independent from the fire. The one-piece frame is held in position with magnets (supplied) and is black with brass effect outlay.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
This product is not suitable for primary heating
|Heat Input (High)||6.8kW|
|Heat Input (Low)||3.5kW|
|Heat Type||Radiant Heat|
|Chimney Flue Compatibility||Pre-Fabricated - Class 1 (178mm/7" Diameter or Greater)|
|Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)|
|Control Ignition||Battery-Free Piezo Spark Ignition (Manual - Rotary Control)|
|Battery Spark Ignition (Remote Control)|
|Control Location||Low Level - Front - Behind Ash Pan (Manual - Rotary Control)|
|Handset (Remote Control)|
|Air Vent Required||Not Required|
|Manufacturer Guarantee||3 Years|
|Safety Features||Flame & Oxygen Monitoring Device|
|Installation Requirement||Gas Safe Registered Installer (Bord Gais - ROI)|
|Installation Information||As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.|
|Fuel Type||Natural Gas|
|Fire Type||Open Fronted|
|Width Outline A||380mm|
|Height Outline B||300mm|
|Depth Outline C||240mm|
|Rear Width Min D1||240mm|
|Rear Width Max D2||360mm|
|Rear Height E||240mm|
|Opening Width Min X1||405mm|
|Opening Width Max X2||440mm|
|Opening Height Min Y1||565mm|
|Opening Height Max Y2||575mm|
|Opening Depth Min Z||220mm|