Elegance Black

Inset Flueless Gas Fire

Elegance Black

Inset Flueless Gas Fire

Energy Label   ERP Product Data Sheet
 
3 Year Guarantee
2.3kW Heat Output

The inset flueless gas fire is based upon a traditional inset gas fire but due to its innovative catalytic flueless technology doesn’t require a chimney or flue. It features all the benefits of flueless catalytic technology; 100% efficiency, reduced running costs, simple installation, realistic coal fuel bed and an ultra clean burning ribbon burner. Being flueless all the of the 2.3kW heat output is distributed into the room with no loss up the chimney unlike a conventional gas fire.

A 43mm spacer frame is fitted as standard to minimise fitting depth (92mm + 20mm clearance) however, for a true flat wall fix to a non-combustible wall/backpanel then the 43mm spacer can be removed and an optional 155mm spacer frame purchased.

The only considerations when installing this appliance are a minimum room size of 27m³, an accessible 8mm gas supply and 100cm² purpose provided ventilation.

This fire is available in Manual (Rotary) with coal fuel bed only. There is no requirement for mains power supply or battery for ignition.

The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The one-piece frame is held in position with magnets (supplied) and is available in either: brass effect, chrome effect or black (model dependent).

Heat Input (High) 2.3kW
Heat Input (Low) 1.3kW
Heat Output (High) 2.3kW
Heat Output (Low) 1.3kW
Heat Type Radiant & Convected Heat
Chimney Flue Compatibiliity No Chimney or Flue Required
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control)
Control Location Low Level - Front - Behind Ash Pan (Manual - Rotary Control)
Air Vent Required 100cm² Air Vent
Manufacturer Guarantee 3 Years
Min. Room Size Required 27m³
Safety Features Flame & Oxygen Monitoring Device
Installation Requirement Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
Control Type Manual - Rotary Control
Fuel Type Natural Gas
Fire Type Glass Fronted
Installation Type Inset
Engine Type Flueless
Product Width Outline A 495mm
Product Height Outline B 620mm
Product Depth Outline 92mm
Firebox Width Min D1 405mm
Firebox Width Max D2 405mm
Firebox Height E 555mm
Fireplace Opening Width Min 410mm
Fireplace Opening Width Max 425mm
Fireplace Opening Height Min 555mm
Fireplace Opening Height Max 570mm
Fireplace Opening Depth 112mm

spares-banner-1