The Elegance glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.
The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.
The Elegance glass fronted can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.
The Elegance fret is a traditional vertical cast design with a modern twist that imitates a classic solid fuel fire grate. It has a curved profile and is intended to stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (depending on the model). The Elegance fret is a solid brass & black freestanding front, which is independent from the fire. The one-piece frame is held in position with magnets (supplied) and is black with brass effect outlay.
This product is not suitable for primary heating
|High Efficiency (Glass Fronted) Inset Fuel Effect Gas Fire Gas Category/Pressure = I2H(20)
|Heat Input Gross (High)
|Heat Input Gross (Low)
|Heat Output Gross (High)
|Heat Output Gross (Low)
|Energy Efficiency Class
|Direct Heat Output
|Radiant & Convected Heat
|Chimney Flue Compatibility
|Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
|Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control)
|Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control)
|Air Vent Required
|Flame & Oxygen Monitoring Device
|Gas Safe Registered Installer (Bord Gais - ROI)
|As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
|Product Width A
|Product Height B
|Product Depth C
|Firebox Width D1
|Firebox Width D2
|Firebox Height E
|Fireplace Opening Width Min
|Fireplace Opening Width Max
|Fireplace Opening Height Min
|Fireplace Opening Height Max
|Fireplace Opening Depth
- High Efficiency Gas Fire – ERP Table 1 | 132.65 KB