Finsbury Satin Black
Multiflue Gas Fire
- 3 Year Guarantee
- 3.2kW Direct Output
- Open Fronted Gas Fire
The multiflue inset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.
This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.
The Finsbury Timeless premium solid cast frame is a stunning classic design with ornate detailing. The distinct fret includes two prominent piers decorated by ornate finials. The decorative ashpan with distinct pattern work is located in position by discrete fixings in the frame and when removed allows access, if applicable, to the controls (model dependent). The Finsbury has been manufactured using traditional sand casting techniques. Therefore naturally some minor imperfections such as pitting and black residual polishing marks may be visible, although this is a direct result of the production and finishing process and is intentionally employed to achieve the authentic appearance. The Finsbury is available in polished cast iron or black finish.
Model Identifier | Conventional Slimline Inset Radiant Heater Gas Category/Pressure = I2H(20) |
Heat Input Gross (High) | 6.2kW |
Heat Input Gross (Low) | 3.5kW |
Heat Output Gross (High) | 3.1kW |
Heat Output Gross (Low) | 1.8kW |
Energy Efficiency Class | F |
Direct Heat Output | 3.2kW |
Heat Type | Radiant Heat |
Chimney Flue Compatibility | Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater) |
Control Ignition | Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control) |
Control Location | Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control) |
Air Vent Required | Not Required |
Manufacturer Guarantee | 3 Years |
Safety Features | Flame & Oxygen Monitoring Device |
Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) |
Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces |
Fuel Type | Natural Gas |
Fire Type | Open Fronted |
Installation Type | Inset |
Engine Type | Multiflue |
Product Width A | 480mm |
Product Height B | 595mm |
Product Depth C | 110mm |
Firebox Width D1 | 215mm |
Firebox Width D2 | 350mm |
Firebox Height E | 545mm |
Fireplace Opening Width Min | 350mm |
350mm | 350mm |
Fireplace Opening Height Min | 540mm |
Fireplace Opening Height Max | 575mm |
Fireplace Opening Depth | 130mm |
-
Finsbury Multiflue – Revision H – 04/16 | 1.37 MB
-
Multiflue Gas Fire – ERP Compliant Table 1 | 132.77 KB