Horizon Black

Multiflue Gas Fire

Horizon Black

Multiflue Gas Fire

ERP Product Data Sheet

  • 3 Year Guarantee
  • 3.2kW Direct Output
  • Open Fronted Gas Fire

The multiflue┬áinset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The elegant understated Horizon front has slightly angled horizontal bars and subtle curved profile allows it to equally suit contemporary, modern or traditional home decors. The Horizon fret is available in: brass (solid brass), chrome (chrome plated brass), black (lightweight aluminium). It is designed to free stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.

This product is not suitable for primary heating

Model Identifier Conventional Slimline Inset Radiant Heater Gas Category/Pressure = I2H(20)
Heat Input Gross (High) 6.2kW
Heat Input Gross (Low) 3.5kW
Heat Output Gross (High) 3.1kW
Heat Output Gross (Low) 1.8kW
Energy Efficiency Class F
Direct Heat Output 3.2kW
Heat Type Radiant Heat
Chimney Flue Compatibility Pre-Cast (Minimum Size 12,500mm┬▓), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control)
Control Location Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control)
Air Vent Required Not Required
Manufacturer Guarantee 3 Years
Safety Features Flame & Oxygen Monitoring Device
Installation Requirement Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces
Fuel Type Natural Gas
Fire Type Open Fronted
Installation Type Inset
Engine Type Multiflue
Product Width A 480mm
Product Height B 595mm
Product Depth C 110mm
Firebox Width D1 215mm
Firebox Width D2 350mm
Firebox Height E 545mm
Fireplace Opening Width Min 350mm
Fireplace Opening Width Max 440mm
Fireplace Opening Height Min 540mm
Fireplace Opening Height Max 575mm
Fireplace Opening Depth 130mm

spares-banner-1