Horizon Chrome
Glass Fronted Gas Fire
- 3 Year Guarantee
- 4.1kW Direct Output
- Glass Fronted – High Efficiency
The Horizon glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.
The Horizon glass fronted gas fire can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.
The elegant understated Horizon front has slightly angled horizontal bars and subtle curved profile allows it to equally suit contemporary, modern or traditional home decors. The Horizon fret is available in: brass (solid brass), chrome (chrome plated brass), black (lightweight aluminium). It is designed to free stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.
This product is not suitable for primary heating
Model Identifier | High Efficiency (Glass Fronted) Inset Fuel Effect Gas Fire Gas Category/Pressure = I2H(20) |
Heat Input Gross (High) | 5.0kW |
Heat Input Gross (Low) | 3.5kW |
Heat Output Gross (High) | 4.1kW |
Heat Output Gross (Low) | 2.8kW |
Energy Efficiency Class | C |
Direct Heat Output | 4.1kW |
Heat Type | Radiant & Convected Heat |
Chimney Flue Compatibility | Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater) |
Control Ignition | Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control) |
Control Location | Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control) |
Air Vent Required | Not Required |
Manufacturer Guarantee | 3 Years |
Safety Features | Flame & Oxygen Monitoring Device |
Installation Requirement | Gas Safe Registered Installer (Bord Gais - ROI) |
Installation Information | As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces. |
Fuel Type | Natural Gas |
Fire Type | Glass Fronted |
Installation Type | Inset |
Product Width A | 480mm |
Product Height B | 595mm |
Product Depth C | 125mm |
Firebox Width D1 | 280mm |
Firebox Width D2 | 395mm |
Firebox Height E | 550mm |
Fireplace Opening Width Min | 390mm |
Fireplace Opening Width Max | 450mm |
Fireplace Opening Height Min | 550mm |
Fireplace Opening Height Max | 575mm |
Fireplace Opening Depth | 145mm |
-
Horizon High Efficiency – Revision J – 02/16 | 2.68 MB
-
High Efficiency Gas Fire – ERP Table 1 | 132.65 KB