The Lulworth is one of the best full depth radiant inset gas fires on the market. It is designed to homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The Lulworth is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.
The Lulworth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.
The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.
Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.
This product is not suitable for primary heating
|Conventional Full Depth Inset Radiant Heater Gas Category/Pressure = I2H(20)
|Heat Input Gross (High)
|Heat Input Gross (Low)
|Heat Output Gross (High)
|Heat Output Gross (Low)
|Energy Efficiency Class
|Direct Heat Output
|Chimney Flue Compatibility
|Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
|Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control)
|Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control)
|Air Vent Required
|Flame & Oxygen Monitoring Device
|Gas Safe Registered Installer (Bord Gais - ROI)
|As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces
|Full Depth Radiant
|Product Width A
|Product Height B
|Product Depth C
|Firebox Width D1
|Firebox Width D2
|Firebox Height E
|Fireplace Opening Width Min
|Fireplace Opening Width Max
|Fireplace Opening Height Min
|Fireplace Opening Height Max
|Fireplace Opening Depth