Lulworth Stainless Steel

Glass Fronted Gas Fire

Lulworth Stainless Steel

Glass Fronted Gas Fire

ERP Product Data Sheet

  • 3 Year Guarantee
  • 4.1kW Direct Output
  • Glass Fronted – High Efficiency

The Lulworth is an exceptional glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.

The Lulworth reinvents the traditional flued inset coal-effect gas fire. The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.

The Lulworth can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

Model Identifier High Efficiency (Glass Fronted) Inset Fuel Effect Gas Fire Gas Category/Pressure = I2H(20)
Heat Input Gross (High) 5.0kW
Heat Input Gross (Low) 3.5kW
Heat Output Gross (High) 4.1kW
Heat Output Gross (Low) 2.8kW
Energy Efficiency Class C
Direct Heat Output 4.1kW
Heat Type Radiant & Convected Heat
Chimney Flue Compatibility Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control)
Control Location Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control)
Air Vent Required Not Required
Manufacturer Guarantee 3 Years
Safety Features Flame & Oxygen Monitoring Device
Installation Requirement Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
Fuel Type Natural Gas
Fire Type Glass Fronted
Installation Type Inset
Product Width A 480mm
Product Height B 595mm
Product Depth C 125mm
Firebox Width D1 280mm
Firebox Width D2 395mm
Firebox Height E 550mm
Fireplace Opening Width Min 390mm
Fireplace Opening Width Max 450mm
Fireplace Opening Height Min 550mm
Fireplace Opening Height Max 575mm
Fireplace Opening Depth 145mm

spares-banner-1