Lycia Black & Chrome

Full Depth Radiant Gas Fire

Lycia Black & Chrome

Full Depth Radiant Gas Fire

ERP Product Data Sheet

  • 3 Year Guarantee
  • 3.5kW Direct Output
  • Open Fronted Gas Fire

The Lycia full depth radiant inset gas fires is designed for homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The full depth gas fire is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Blenheim fret is a classic traditional cast design with ornate vertical bars and delicate form. It features a bowed profile with two decorative finials and is designed to free stand in front of the fire and frame. The ashpan is a separate component and if applicable, provides access to the controls (model dependent). The one-piece frame is held in position with magnets (supplied).

This product is not suitable for primary heating

Model Identifier Conventional Full Depth Inset Radiant Heater Gas Category/Pressure = I2H(20)
Heat Input Gross (High) 6.8kW
Heat Input Gross (Low) 3.5kW
Heat Output Gross (High) 3.8kW
Heat Output Gross (Low) 1.9kW
Energy Efficiency Class F
Direct Heat Output 3.5kW
Heat Type Radiant Heat
Chimney Flue Compatibility Pre-Cast (Minimum Size 12,500mm²), Pre-Fabricated - Class 2 (127mm/5" Diameter), Conventional Chimney - Class 1 (178mm/7" Diameter or Greater)
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control), Battery Spark Ignition (Manual - Fingerslide Control), Battery Spark Ignition (Remote Control)
Control Location Low Level - Front - Behind Ash Pan (Manual - Rotary Control), High Level - Right - Side (Manual - Fingerslide Control), Handset (Remote Control)
Air Vent Required Not Required
Manufacturer Guarantee 3 Years
Safety Features Flame & Oxygen Monitoring Device
Installation Requirement Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces
Fuel Type Natural Gas
Fire Type Open Fronted
Installation Type Inset
Engine Type Full Depth Radiant
Product Width A 480mm
Product Height B 595mm
Product Depth C 180mm
Firebox Width D1 245mm
Firebox Width D2 375mm
Firebox Height E 545mm
Fireplace Opening Width Min 375mm
Fireplace Opening Width Max 450mm
Fireplace Opening Height Min 540mm
Fireplace Opening Height Max 575mm
Fireplace Opening Depth 200mm

spares-banner-1