Pinoir

Wall Hung Gas

Pinoir

Wall Hung Gas

Energy Label   ERP Product Data Sheet
 
3 Year Guarantee
2.6kW Heat Output (Gross)

The Pinoir wall mounted flueless gas fire has been designed to introduce the finest natural stone materials. The high-end aesthetic equally suits a contemporary, modern, traditional or classic interior decor. The innovative polished black granite stone frame is manufactured using a clever aluminium honeycomb subframe. This process not only helps to increase the manufacturing precision but also helps to reduce the weight so that it can be wall mounted. Behind its luxurious natural aesthetic is the innovative flueless technology which delivers the ultimate in efficiency, significantly reducing the running cost while ensuring that it is one of the safest gas fire technologies in the world. The Pinoir has a fantastic heat output of 3.5kW, and is fully variable from 2.0kW (low) and is designed for a minimum room size of 40m³ (typically 4.1m x 4.1m with a 2.4m high ceiling).

Flueless gas fires offer the following benefits: reduced running costs, simplified installation and servicing. Incorporating the latest in gas fire technology flueless gas fires do not need a chimney or flue to operate. Instead the combustion gases pass through a catalytic system positioned at the top of the appliance which converts carbon monoxide into harmless carbon dioxide and water vapour. Levels of which are so low they are typically present in fresh air. Our innovative technology provides a flexible design allowing you to install a fire not only in the living room but also dining room, office, or kitchen. Not suitable for bedrooms or bathrooms.

The only points to consider when installing a flueless gas appliance are a minimum room size (see individual product specification), an accessible 8mm gas supply and the allowance of a 100cm² air vent to be installed in the room. TVs are not permitted to be installed above a flueless gas fire as a majority of the heat generated by the fire comes out of the top.

This Pinoir is available in Manual control (Rotary) positioned on the right hand side of the fire for easy accessibility. There is no requirement for mains power supply or battery for ignition. To operate, simply depress the control knob, hold and rotate clockwise through two clicks and and release to achieve low setting. Continue rotating clockwise to reach the high setting.

Please note the price is dependent upon the final configuration. This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine suitability.

Heat Input (High) 2.0kW
Heat Input (Low) 1.3kW
Heat Output (High) 2.0kW
Heat Output (Low) 1.3kW
Heat Type Radiant Heat
Chimney Flue Compatibility No Chimney or Flue Required
Control Ignition Battery-Free Piezo Spark Ignition (Manual - Rotary Control)
Air Vent Required 100cm²
Manufacturer's Guarantee 3 Years
Minimum Room Size Required 40m³
Safety Features Flame & Oxygen Monitoring Device
Installation Requirements Gas Safe Registered Installer (Bord Gais - ROI)
Installation Information As with any open fire, a fire guard complying with BS 8423 must be used. Fire guards are intended to protect people from falling into a fire, prevent burns and reduce the risk of injury, particularly to young children and the infirm. In addition it is intended to reduce the risk of fire resulting from clothing and/or other flammable materials coming into contact with, or in proximity to, burning fuel and/or hot surfaces.
Colour Black
Installation Type Wall Hung/Mounted
Engine Type Flueless
Fuel Type Natural Gas
Product Width A 1050mm
Product Height B 600mm
Product Depth C 160mm
Firebox Width D 765mm
Firebox Height E 470mm

spares-banner-1