Lulworth Stainless Steel

The Lulworth slimline radiant inset gas fire is one of our most popular models thanks to it’s slimline design and affordable price point. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary), Manual (Fingerslide) or Remote Control. It does not require a mains power supply however, the Manual (Fingerslide) and Remote options require a battery (supplied) for ignition only.

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

Lulworth Stainless Steel

The Lulworth is one of the best full depth radiant inset gas fires on the market. It is designed to homes with a pre-cast flue, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional class 1 brick chimney. This versatile fire is compatible with a standard 16″ wide x 22″ high fireplace opening (please refer to product specification – excludes low lintels) and requires a minimum depth of 180mm plus 20mm debris collection. The Lulworth is an extremely popular all-rounder thanks to its affordable price, open fronted design and deep fuel bed with authentic flame picture.

The Lulworth is available with coal, pebble or log effect fuel bed. It can be specified in Manual Control (Rotary), Manual (Fingerslide) or Remote Control.

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

Lulworth Stainless Steel

The Lulworth is an exceptional glass fronted inset gas fire designed to fit multiple flue installations. It is compatible with most pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm / 5″ diameter or greater) and conventional class 1 brick built chimneys. The multi-flue firebox fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification – excludes low lintels) and requires a minimum fireplace depth of only 125mm, plus 20mm for debris collection.

The Lulworth reinvents the traditional flued inset coal-effect gas fire. The discrete glass front helps increase efficiency by reducing the amount of heat input required while the patented safety draft diverter system increases safety in the event of a flue draft reversal.

The Lulworth can be specified in Manual Control (Rotary) or Manual (Fingerslide) and is available with coal fuel bed only.

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Please note the price is dependent upon the final configuration. Natural gas only.
This information is intended for guidance only. Focal Point Fires recommends booking a Home Survey to determine the actual chimney or flue specification.

This product is not suitable for primary heating

Lulworth Stainless Steel

The Lulworth LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Lulworth LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Lulworth LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

This product is only suitable for well insulated spaces or occasional use.

Lulworth Stainless Steel

The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.

The Lulworth LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Lulworth LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Lulworth LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

This product is only suitable for well insulated spaces or occasional use.

Lulworth Stainless Steel

The inset flueless gas fire is based upon a traditional inset gas fire but due to its innovative catalytic flueless technology doesn’t require a chimney or flue. It features all the benefits of flueless catalytic technology; reduced running costs, simple installation, realistic coal fuel bed and an ultra clean burning ribbon burner. Being flueless all the of the 2.3kW heat output is distributed into the room with no loss up the chimney unlike a conventional gas fire.

A 43mm spacer frame is fitted as standard to minimise fitting depth (92mm + 20mm clearance) however, for a true flat wall fix to a non-combustible wall/backpanel then the 43mm spacer can be removed and an optional 155mm spacer frame purchased.

The only considerations when installing this appliance are a minimum room size of 27m³, an accessible 8mm gas supply and 100cm² purpose provided ventilation.

This fire is available in Manual (Rotary) with coal fuel bed only. There is no requirement for mains power supply or battery for ignition.

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Lulworth Stainless Steel

The Lulworth complete suite comes with an unfinished ash surround and hearth tray, which gives you with the opportunity to hand paint or stain to a colour of your choice to match your interior. The back panel and hearth are a reversible laminate give you the ability to choose from either white or black. Back panel will need to be cut with a laminate jigsaw blade to make the opening for the fire. Self-assembly required.

The multiflue inset gas fire is one of our most popular models thanks to it’s slimline design. It is designed to fit virtually 99% of any modern pre-cast flues, pre-fabricated flue systems (class 1 or class 2 with min. 127mm or 5″ diameter) or conventional chimneys. The slimline firebox fits a standard opening, generally 16″ wide x 22″ high (please refer to product specification). Most importantly this fire only requires a fireplace depth of 110mm plus 20mm for debris collection.

The multiflue is 50% efficient and has a maximum heat output of 3.1kW, which provides sufficient heat to warm a medium sized room within a modern home. This fire can be specified with coal or pebble effect fuel bed and is available in either Manual (Rotary.

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

Lulworth Stainless Steel

The fireplace really is the focal point of any homely living room. Add immediate charm and warmth with one of our Kingswood fireplace suites. Whether you prefer a contemporary interior, or a more traditional, the style of the Kingswood Suite would easily suit both. A complete fireplace solution for any living room.

Our Kingswood fireplace suites include an ash veneered surround, in a minimal yet stylish design. Perfect for any interior room theme.

The back panel of this fireplace suite is reversible, leaving you with the choice of having either a beautifully subtle white marble effect, or for a more striking and elegant aesthetic, a black marble effect.

The Lulworth LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. To keep operation simple there are three switch settings: 1) Flame effect only, 2) Flame + 1.0kW Heat and 3) Flame + 2.0kW Heat. The controls are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The Lulworth LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

The Lulworth is a very popular contemporary frame finished in cool brushed stainless steel. Installed with a modern fireplace the Lulworth can really help transform the look and feel of your living room. The Lulworth comprises of a one piece frame with two horizontal curved bars and a freestanding ashpan. The frame is held in position with magnets (supplied). Designed with affordability in mind the Lulworth is supplied as a self assembly kit to reduce costs. Please note careful attention is required to assemble the frame. The curved bars and ashpan are pre-rolled and as a result of packaging and transit may require slight adjustment to the curvature at the assembly stage.

This product is only suitable for well insulated spaces or occasional use.