Horizon Brass

LED Electric Inset Fire

Horizon Brass

LED Electric Inset Fire

  • 3 Year Guarantee
  • 2.0kW Heat Output

The Horizon LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance. LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Horizon LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).

For added convenience two spacer frames are provided (supplied fitted) to allow the Horizon LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).

The elegant understated Horizon front has slightly angled horizontal bars and subtle curved profile allows it to equally suit contemporary, modern or traditional home decors. The Horizon fret is available in: brass (solid brass), chrome (chrome plated brass), black (lightweight aluminium). It is designed to free stand in front of the fire and frame. The ashpan is a separate component and provides access to the controls (model dependent). The frame is held in position with magnets (supplied) and depending on the model is available in: brass effect, chrome effect or black.

This product is only suitable for well insulated spaces or occasional use.

Heat Input (High) 2.0kW
Heat Input (Low) 1.0kW
Heat Output (High) 2.0kW
Heat Output (Low) 1.0kW
Heat Type Fan Heater
Chimney Flue Compatibility No Chimney or Flue Required
Control Location High Level - Front - Below Canopy (Manual - Buttons)
Manufacturer Guarantee 3 Years
Safety Features Thermal Trip Switch
Installation Requirement Qualified Electrician Recommended
Installation Information All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations.
Heat Direction Frontwards
Technology Low energy LED flame effect
Power Voltage Supply 220 - 240V
Control Type Manual - Buttons & Remote Control
Fuel Type Electric
Installation Type Inset or Freestanding
Engine Type LED Electric
Width Outline A 480mm
Height Outline B 595mm
Depth Outline C 114mm
Depth Spacer 1 C1 57mm
Depth Spacer 2 C2 57mm
Firebox Width Min D1 390mm
Firebox Width Max D2 450mm
Firebox Height E 555mm
Fireplace Opening Width Min 400mm
Fireplace Opening Width Max 450mm
Fireplace Opening Height Min 560mm
Fireplace Opening Height Max 580mm
Fireplace Opening Depth 0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers)

spares-banner-1