Langham Chrome
LED Reflections Electric Inset Fire
- 3 Year Guarantee
- 2.0kW Heat Output
The LED reflections takes our standard LED electric inset fire to another dimension. By incorporating a special reflective glass window which increases the flame effect depth giving the illusion that the flame is burning from deep behind the fuel bed.
The Langham LED inset electric fire features LED technology designed to significantly improve the flame picture and running performance.LED technology not only provides a deeper, richer flame picture with enhanced flame movement but is also a fraction of the cost to run when compared to a conventional incandescent bulb. It will last a lot longer too. The LED electric fire features: 2.0kW heat output (max), flame effect only – no heat, thermostatic control, timer, full remote control or buttons which are located high underneath the hood for easy accessibility. A discrete fan heater provides forward directional heat and is of good quality to reduce operating noise. The electric fire has a helpful LED display located in the top left-hand corner of the window which displays the heat setting, flame cycle and sleep timer. Please note: the LED display is only shown when changing a function. The Langham LED fits a standard fireplace opening, typically 16″ wide x 22″ high (please refer to specification).
For added convenience two spacer frames are provided (supplied fitted) to allow the Horizon LED to be taken out of the box, placed flush against a flat wall and plugged in for instant heat – no chimney or flue depth required. For installation into a fireplace opening, one or both spacer frames can be removed (depending on the available fireplace depth). This provides the following options: fully inset (0 spacers – requires a 114mm fireplace depth), semi-inset (1 spacer fitted – requires a 54mm fireplace depth) or flush-fit (2 spacers – 0mm fireplace depth).
The Langham is a premium contemporary frame in chrome effect finish. The design features three curved horizontal bars that seamlessly blend into the frame for a minimalist aesthetic. The Langham has been specially engineered from extruded aluminium to create a unique design with precision detailing that requires no pre-assembly. Another unique feature of this frame is that the lower two bars are designed to be a clever ashpan which when removed allows access to the controls, if applicable (model dependent). The frame is held in position with magnets (supplied).
This product is only suitable for well insulated spaces or occasional use.
Heat Input (High) | 2.0kW |
Heat Input (Low) | 1.0kW |
Heat Output (High) | 2.0kW |
Heat Output (Low) | 1.0kW |
Heat Type | Fan Heater |
Chimney Flue Location | No Chimney or Flue Required |
Control Location | High Level - Front - Below Canopy (Manual - Buttons) |
Manufacturer Guarantee | 3 Years |
Safety Features | Thermal Trip Switch |
Installation Requirement | Qualified Electrician Recommended |
Installation Information | All electric fires feature an automatic safety cut-out device. Simply plug into a standard socket. No chimney or flue required. Designed for use in Great Britain and Republic of Ireland only. All fires must be installed in accordance with the manufacturer’s installation and user instructions and current Building Regulations. |
Heat Direction | Frontwards |
Technology | Low energy LED flame effect |
Power Voltage Supply | 220 - 240V |
Control Type | Manual - Buttons & Remote Control |
Fuel Type | Electric |
Installation Type | Inset or Freestanding |
Engine Type | LED Electric |
Width Outline A | 480mm |
Height Outline B | 595mm |
Depth Outline C | 114mm |
Depth Spacer 1 C1 | 57mm |
Depth Spacer 2 C2 | 57mm |
Firebox Width Min D1 | 390mm |
Firebox Width Max D2 | 480mm |
Firebox Height E | 555mm |
Fireplace Opening Width Min | 400mm |
Fireplace Opening Width Max | 450mm |
Fireplace Opening Height Min | 560mm |
Fireplace Opening Height Max | 580mm |
Fireplace Opening Depth | 0mm (2 spacers), 57mm (1 spacer), 114mm (0 spacers) |
-
LED Inset Electric Fire – Revision H – 05/18 | 420.28 KB